The Ceramic sand production process

The main raw materials of the ceramisite production are shale, clay, fly ash, industrial waste, river silt,etc.Raw materials are different,its production process and its products performance are also different.In general, the expansion ratio of clayey shale (siltstone and claystone mixture) is larger,Products bulk density is small, good insulation properties, but low strength relatively cylinder pressure,can be used in the production of non load-bearing hollow blocks.

Ceramic sand production process is as follows:Mining-primary crushing-secondary crushing-screening-temporary store-feeding-sintering-cooling-finished products screening gradely-stacking-transportation (bagging).

In operation,you should note the matching relation between them which are the volume of feed and coal feed, kiln speed,air input,so that they are adjusted to the best state of the process.fly ash and other industrial waste residue are produced Ceramic sand.Nowadays, high strength and lightweight fly ash aggregate has successfully come out,the performance indicators are better than the shale and clay Ceramic sand.

Main Technical Parameter of Ceramsite Line  see at http://www.hsnee.com/solution/CeramsiteSandProductionLine.html

Company:HeNan Hongji Mine Machinery CO.,LTD
Email:ella@zzhongji.com
Address: No.668 (Hongji Industrial Park), West Zhongyuan Road, Zhengzhou, China
Web:www.hongjigroup
www.hsnee.com
Tel:+86-371-67662768
Fax:+86-371-67668558
ZRF